Mineral admixtures play an important part in making of High Strength Concrete systems. Before going to mineral admixtures, I will clarify the difference between admixtures and additives

Concrete admixtures vs additives:

Anything which is added during grinding stage which has some special effect on fresh and hardened properties of concrete while on the other hand admixture is added during mixing stage of concrete making.

Admixtures are also classified into two major types

  • Chemical Admixtures
  • Mineral Admixtures


Mineral Admixtures:

Mineral Admixtures include mainly Silica Fume (SF), Fly Ash (FA), different kind of ashes such as Rice Husk Ash (RHA), Bagasse Ash, Waste Paper Sludge Ash (WSA) and also different kind of slags including Blast Furnace Slag (BFS)  etc. Different mineral admixtures have different size particles and also have different surface morphology. Electron Microscopy of some mineral admixtures particles along with cement particles is shown.

mineral admixtures
photo source: engineeringintro.com

Mineral admixtures further are divided into two types

  1. Inert mineral admixtures
  2. pozzolanic mineral admixtures


Inert Mineral Admixtures:

Materials which in crystalline form having a well-defined crystal structure. Si02  present in crystalline material is not available for pozzolanic reaction

Pozzolanic Mineral Admixtures:

Si02 present in amorphous materials reacts with calcium hydroxide produced during cement hydration and, in turn, produces CSH gel which is a stronger product as compared to calcium hydroxide. This particular reaction is called pozzolanic reaction.

“Pozollanic reaction is between amorphous Si02 and CH”


Properties of Some well know mineral admixtures:

Silica Fume

silica fume - mineral admixtures
Premium (white) Standard (grey) Silica Fume photo source: marginup.com

Silica Fume is very frequently used in cement-based materials. In general silica fume is very rich in amorphous Si02, therefore, it is responsible for the significant pozzolanic reaction.

The main use of silica fume includes high strength dense microstructure, high heat of hydration etc. With all its advantages it has certain drawback as it induces high early shrinkage and should be used in cement based systems with care.

Lime Stone Powder (LSP)

Lime Stone Powder- Mineral Admixtures
Lime Stone Powder. photo Source: hydratedlime

Limestone powder basically is inert mineral admixture, however, there is an evidence that it improves early strength because of its physical packing effect and in addition it offers some sites for preferential precipitation of hydration products. In research, it has been proven that use of LSP in combination of flyash improves the response of cementitious systems




  1. Thanks for precious information ..always l ask about the difference between the admixtures and the additives always I find mysterious answer ..Thanks again for the perfect explanation. ..Ya